NATO F-34
Zawartość strony
Applications
The aviation turbine engine fuel, NATO Code F-34, is produced from components obtained at a definite technological regimen in processes of hydrodesulphurisation and hydrocracking. The components meet rigid quality standards. The F-34 fuel is intended for turbine-type aviation engines.
Characteristic
The aviation turbine engine fuel, NATO Code F-34, does not contain any additive preventing water crystallisation in the fuel. Its quality meets the rigorous requirements set forth in the documents listed below:
- Def Stan 91-87, Issue 5 dated July 20th 2005, Reprinted June 22nd 2007
- MIL-DTL-83133E Detail Specification Turbine Fuels, Aviation, Kerosene Types, NATO F-34 ( JP-8 ), NATO F-35, and JP-8+100
- NO-91-A258-2 Paliwo do turbinowych silników lotniczych. Paliwo kod NATO F-34 (Aviation Turbine Fuel, NATO Code F-34)
- STANAG No.3747 Issue 5, Guide Specifications (Minimum Quality Standards) for Aviation Turbine Fuels (F-34, F-35, F-40 and F-44)
Properties
| Requirements |
Value |
Test method |
| Solid impurities content, mg/l, not higher than |
1.0 |
ASTM D 5452 IP 423 |
| Acidic number, mg KOH/g, not higher than |
0.015 |
ASTM D 3242 |
| Aromatic HC content, % by weight, not higher than |
25.0 |
ASTM D 1319 |
| Total sulphur content, % by weight, not higher than |
0.30 |
ASTM D 4294 |
| Mercaptan sulphur content, % by weight, not higher than |
0.0030 |
ASTM D 3227 |
Distillation:
- 10 %, by volume, distils up to temperature, 0C, not higher than
- distillation end temperature, 0C, not higher than |
205.0
300.0 |
ASTM D 86 |
Flash point, °C, not lower than
or not lower than |
38.0 40 |
IP 170
ASTM D 56 |
| Density at 15 °C, kg/m3 |
from 775.0 to 840.0 |
ASTM D 1298 ASTM D 4052 |
| Crystallisation temperature, °C, not higher than |
-47.0 |
ASTM D 2386 ASTM D 5972 |
| Kinematic viscosity at - 20°C, mm2/s, not higher than |
8.000 |
ASTM D 445 |
| Combustion value, MJ/kg, not lower than |
42.80 |
ASTM D 4529 ASTM D 3338 |
Smoke point flame height, mm, not lower than
or smoke point flame height, mm, not lower than
and naphthalene content, % by volume, not higher than |
25.0
19.0
3.00 |
ASTM D 1322
ASTM D 1322
ASTM D 1840 |
| Electric conductivity, pS/m |
from 50 to 600 |
ASTM D 2624 |
| Filtration time, min., not longer than |
15 |
PN-V-04031 |
| Lubricity – wear trace diameter, mm, not greater than |
0.65 |
ASTM D 5001 |
Zawartość – urządzenia standardowe